Linksys PAP2T AND 2002 VoIP Adaptor Setup

  1. Connect network cable, power supply and analogue handset.
  2. After the unit has finished powering up, pick up the handset and dial **** to access the Linksys voice menu. At the voice prompt, dial 110# and you should hear the IP Address of the unit. Go to a web browser and type in the IP Address like so: http://IP_ADDRESS/admin/advanced. The administration screen of the Linksys should be displayed.
  3. Click on the Line 1 and Line 2 tab and configure your account details exactly as displayed in the image below (example on Line 2)

·         Set Proxy to: vptsip.dyndns.org 
·         Set Register to yes
·         Set Display Name to your ID (example 72345678)
·         Set User ID to your ID (example 72345678)
·         Set Password to your Password (example 123456)

 

Call our VoIP Sales Specialists

 +44(0)208 810 6609

 

Currency

   

 

Get into VoIP

 

Wholesale Broadband ADSL+

 

Wholesale Telephony

 

 

 

 

 Solution Graphics

 Questions or problems regarding this web site should be directed to [support@callingplaces.com].
Copyright © 1999 [CallingPlaces Ltd, 12 Ashbourne Road, London W5 3ED registered 1999 in England & Wales no: 3749412]. All rights reserved.
Last modified: 16/06/2010.